How do I connect the power supply and USB cable to the BioScan unit?
Please contact us if you need further assistance.
Related Articles
Does the Power Supply for both the MSA Professional and the BioScan work in both the 120v and 220v environment?
Yes. As the leading worldwide supplier of EAV Devices, IHT provides a power supply for both the MSA Professional and BioScan Devices which are rated to handle voltages below 120v (USA Standard) and up to 240v (maximum known Voltage). Customers ...How do I connect my MSA Professional/MSA 21 to my computer through a USB Port?
IHT recommends that you purchase a USB to serial adapter cable that converts the 9 pin serial port to a USB connection. The adapter connects between an open USB port on the computer, and your existing serial cable. The adapter is not intended to be ...With a Vantage or BioScan I get a morph or device check message. What do I do?
If error messages like “Morph Load Failed” error or “Device Check” message appears when opening software then check if the hardware box is turned on, and plugged into a USB port. Also check if USB software is installed. Try this procedure: 1. ...What is recommended to protect my equipment from power surges?
We recommend the use of a UPS (Uninterruptable Power Supply) with surge protection. In the event of a power outage this gives you enough time to close your software, have the auto backup of your files run and then turn off your Device. Please contact ...What sleep settings in Microsoft Windows is BioScan compatible with?
If the computer goes into a sleep mode (sometimes referred to as hibernate) while the software is open, communications between the computer and the BioScan unit will be lost and may result in error messages during use. Please perform the following ...