How should accessories be stored when not in use?

How should accessories be stored when not in use?

Accessory cables should be placed in a circular pattern that does not result in stress, especially at the ends of the cables. Please do not tightly wrap a cable around itself as this can lead to a short in the wires and place addition stress on end pieces.



Please contact us if you need further assistance.

    • Related Articles

    • Where can I buy accessories?

      IHT has a store. It handles both domestic and international purchases. You are also welcome to contact us by phone at 801-889-2319. Third party accessories like electrodes strips and lasers are available for sale on our online store or you can try a ...

    • Is internet access required to use the software?

      Internet access is not required to open the software; however at regular intervals (generally monthly), the software will require internet access to verify authorized use of the software. Once the software is reauthorized it can be disconnected from ...

    • Which IHT Devices Can Use the Epic Stylus?

      The MSAProfessional (only if configured to use the Epic), the Vantage and the VantagePro Systems. Only the VantagePro is currently supported by IHT. The Epic Stylus was first released in 2006 as an upgrade to the MSAS Professional. Any system built ...

    • Is it safe to use IHT equipment Outside?

      It is perfectly safe to use an IHT Device outside IF the ambient conditions approximate those of a typical indoor office environment! However, please be aware of the following: Excessive dust and prolonged sunlight can be harmful to the electronics ...

    • Can I use other software on the same computer as BioScan?

      IHT requires the computer running our software to be dedicated to only the use of the IHT device. You are the owner of your computer and you may do as you wish, but may run the risk of conflicts when other software is installed. Some applications ...